Magnetic separation equipment
The Separating equipmnent is suitable for wet magnetic separation of materials less than 3mm such as magnetite, calcined ore, et
The separating equipment is generally composed of drum, magnet system, cell body, magnet guide plate, support, shower pipe, feeding case, discharging pipe, baseboard, adjustment device of magnetic declination, etc.
These series products are used for wet magnetic separation of materials with granularity below 3mm as magnetite, pyrrhotine, bake ore and washingtonite. It is also used for deironing of materials as non-metal ores, coal and building materials. Average magnetic induction of barrel surface is 100-600mT. According to user’s demands, it can provide magnetic separation with different magnetic induction as forward flow, semi counter flow and counter flow. The products have features as simple structure, big yield, convenient operation and easy maintenance.
Hydrocyclone unit sale
type hydro cyclone is frequently used in the second paragraph of the metal concentrator mill or coarse ore in the grinding process and mechanical grading machine into a closed-circuit use, made to replace the machine seized grading machine, security and grain size grading operation. The device has a simple structure, long life, large capacity, small footprint, non-consumption of power and so on. Is a highly efficient micro-fine particles grading, de-mud equipment. The device works yes centrifugal sedimentation, when the two-phase mixture to be separated in order to put some pressure on it from the line to the mine mouth, entered after the cyclone, resulting in a strong three-dimensional elliptic rotation shear is strong swirling flow. As the coarse particles and fine particle size between the difference in the centrifugal force, centripetal force, buoyancy, fluid resistance, and so the majority of coarse particles under the action of screw trajectory by the Ministry under the spiral in the end, as the Spigot discharge, fine particles as the overflow from the overflow stream discharge tube.
6S shaking tatle sale
Gold shaking table, 6S shaking table working Principle
6S shaking table (shaking table for gold) is to make separations based on the difference of specific gravity of feed materials, reciprocating asymmetrical movement and the stratification performance of the inclined table surface in the lateral water flow with obvious zone of the minerals with different specific gravities on the table, high quality of concentrates produced, convenient operation and adjustment and other features.
Gold ore mining equipment
gold ore mining equipment, gold ore mining equipment for sale S series gold ore mining equipment with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sand stone making, etc. The machinery’s pressure resistance strength is under 350Mpa. And gold ore mining equipment are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc
Cone crusher manufacturer
PYB spring cone crusher is a kind of cone crusher which is manufactured in the former Soviet Union;it combines 1980s international technology and kinds of cone crushers’ technology.One the basis of these technologies,Tarzan had successfully developed the compound cone crushers,hydraulic cone crushers by our efforts.The spring safety device is the overload protection device which can avoid the damage to the machine when metallic foreign body entre through the crushing cavity.The capacity of this machine is very big, owning to the technology of laminated crushing,finished products are mainly cubic shape and less needle-flake material.
Application:
It is widely used in industries of metallurgy, architecture, road construction, chemical industry, phosphate.It is the preferred choice for secondary crushing equipment which is used for hard and medium mineral rock such as iron ore,copper ore, limestone, quartz, granite, basalt and dolerite.